| Applications : PP related processes,coating,injection,extrusion | |||
| Finished products : blow molding,plastic tube, hollow board,injection molding, packing tape,fresh-keeping bag,car cover,window film,wall sticker,non-woven | |||
| ITEM | TEST METHOD | UNIT | TYPICAL VALUE |
| Base material | — | — | PP |
| CaCO3 content | — | — | 75-85% |
| Proportion | ASTM D 1505 | g/cm | 1,8 |
| Melt Index | ASTM D 1238 | g/10 min | 3-30 |
| Water | Moisture Analyzer | <0.1% | |
| Appearance | cylindrical particles | — | 3 ± 0.5 |
| CaCO3 whiteness | — | — | 98.5% ± 1 |
| Processing Conditions Recommended Reference: Due to different production variations, recommend usage is usually between 5~50% depending on the actual conditions. The processing temperature depends on the main characteristics of each plastics product and the mechanical conditions, and can be used between 220±40°C | |||
| Other instructions | |||
| Packing: 25 KG / BAG | |||
| Note: Transport, storage must be moisture-proof and moisture-proof, place in a cool place to avoid direct sunlight, and use immediately after unpacking to avoid moisture. | |||